Handlebars are one of the main components of bicycle control. They are mainly composed of a cross, a stand and a sleeve or a belt. Sometimes, a pair of handlebars will be added according to actual needs. Choosing the right handlebars can bring better riding comfort and control experience.
At present, there are four kinds of bicycle handlebars, which are bent handlebars, straight handlebars, goose handlebars and butterfly handlebars:
Tianjin Wangqingtuo Town Jiabao Car Material Co., LTD., is the main base of the production of this series of products, products are respectively Tianjin bicycle handlebars, Tianjin performance car handlebars; It is also a professional manufacturer of Tianjin handlebars, Tianjin handlebars, Tianjin pedal rods, Tianjin saddle tubes and various bicycle spare parts. The following is a brief introduction of centralized bicycle parts:
The feature of straight handlebars is short distance, relatively flexible handling, light weight. The general distance between 560-580mm, if with a pair of handlebars, when standing pedaling acceleration is very convenient, the only deficiency is due to the length of the handlebar limit, the operation of the activity Angle is not very big, feel riding the action is very "gentle". So it's usually used more in off-road vehicles.
Wild goose is also called "wild goose wing" in some places, because it looks like the spread of wild goose wings, so it is called wild goose. The characteristics of wild goose handle are long distance, thick pipe diameter, cold drawing and reducing pipe technology is frequently used, and the processing and heat treatment technology is complex. There are a variety of curvatures for lovers to choose. In the degree of comfort is also higher than the straight handle, but the weight is slightly higher than the straight handle, because of the diameter of the pipe, bending Angle. The cushioning of the handlebars has been greatly improved and is usually used on some of the more intense sports cars, such as DS (double slalom) DH (downhill) cars. It is common to use more than 640mm in length, but some 610mm in length wild goose handles are also commonly used on mountain buggies.
The bend is mainly used for the road car handlebars, the measurement method is not the same as the usual mountain bike handle length measurement, the measurement method is the distance between the center of the left and right handlebars at the end of the handlebars is the length of the handlebars, generally there are 40mm, 42mm 44mm these common specifications, in the sports car there are some strange shape of the special handle, Like the handlebars on the individual time trial. The handlebars are limited and are usually used in professional competitions. Few cars are compatible with this type of handlebar.
As the name implies, the handlebars look like a butterfly with wings spread. This kind of handlebars are often used on bicycles for long-distance travel. Due to the wide overall range of the handlebars and the bending of the handlebars at various angles, riders can have different positions to change, so as to prevent sports injuries caused by load-bearing riding. Good handling makes it the first choice for touring bikes.
